SEND_CAN_MESSAGE

Download Flojoy Studio to try this app

Send a message to a CAN system. Send a message to a CAN device. This block should be compatible with all devices that support the CAN interface. A connection to the device is required. Use a CAN_CONNECT block to connect to a CAN device. Params: CAN_address : str The CAN device address to connect to. message : Stateful A list of messages to send to the CAN device. Returns: out : DataContainer Optional: None

Python Code

from typing import Optional
from flojoy import flojoy, DeviceConnectionManager, Stateful, DataContainer
import can


@flojoy(deps={"python-can": "4.3.1"})
def SEND_CAN_MESSAGE(
    CAN_address: str, message: Stateful, default: Optional[DataContainer] = None
) -> Optional[DataContainer]:
    """Send a message to a CAN system.

    Send a message to a CAN device. This block should be compatible with all devices that support the CAN interface.
    A connection to the device is required. Use a CAN_CONNECT block to connect to a CAN device.

    Parameters
    ----------
    CAN_address : str
        The CAN device address to connect to.
    message : Stateful
        A list of messages to send to the CAN device.

    Returns
    -------
    DataContainer
        Optional: None
    """
    connection: can.interface.Bus = DeviceConnectionManager.get_connection(
        CAN_address
    ).get_handle()

    for msg in message.obj:
        connection.send(msg)

    return None

Find this Flojoy Block on GitHub

Example App

Having problems with this example app? Join our Discord community and we will help you out!

Press enter or space to select a node.You can then use the arrow keys to move the node around. Press delete to remove it and escape to cancel.

Press enter or space to select an edge. You can then press delete to remove it or escape to cancel.

Download this Flojoy App

This example shows how to send a frame to a CAN bus using the CANable USB-to-CAN adapter. The application sends a first frame intended to indicate the start of a test on a system. Subsequently, the application sends a burst of messages and then sends a frame to indicate the end of the test.

This application uses an CANABLE_CONNECT block to establish a connection to the CAN bus, but this connection could be replaced by any other connection. For example, the PEAK_CONNECT block could be used instead.